Fluke Biomedical QA-ES III Electrosurgical Analyzer
Electrosurgical Analyzers
$5495from
Category
Electrosurgical Analyzers
ESU analyzers and test loads for generator output, leakage and REM/ARM verification.
ESU analyzers measure RF output power, current and crest factor into a controlled load, and verify return electrode monitoring. They are annual-inspection equipment for any department maintaining electrosurgical generators.
The load bank is the instrument
Measuring RF power requires a precise, non-inductive load that can absorb the generator's full output. The QA-ES III has an internal variable load bank covering 0 to 5115 ohm, which is what allows automated power distribution curves.
For higher-power generators an external load such as the RF303 extends the range.
REM and ARM testing
Return electrode monitoring verification is a safety-critical test that confirms the generator will shut down on a poor patient plate connection. Confirm the analyzer supports the contact quality test method your generators use.
We exercise the load bank through its full range and verify RF measurement against a generator of known output before listing.
Common questions
Is the QA-ES II still adequate?
For routine power verification, yes. The QA-ES III adds automation and a wider load range.
Do these test all generator brands?
Yes, though cable adapters vary. Tell us which generators you service and we will confirm the adapters needed.
Does the load bank wear out?
The resistive elements are durable. We step through the full range as part of testing.
Ask about electrosurgical analyzers
Prices shown are indicative for a single tested unit. Quantity pricing, dealer terms and blanket orders are quoted individually. Send the list and we will respond within one business day.